xMove 2.0 Ultimate

xMove 2.0 Ultimate

The xMove 2.0 Ultimate features a modern charge time calculator and a timeless design. Suitable for all common types of rechargeable batteries in model construction (LiPo, Li-Ion, Li-Fe, NiMH, NiCd and Pb). Simple, efficient user interface for easy use. Effective features and detailed information. Real-time display showing battery voltage, charging current, battery pack temperature, charging/discharging capacity, elapsed time, input voltage, etc. lets you view the current status and set up safety parameters. The voltage regulator for individual cells in a battery pack allows you to balance the pack during charging/discharging. The device can monitor and balance each individual cell during charging/discharging (tolerance: +0.01 V). Various operating modes for different requirements: automatic charging, balancing, fast charging, storage, cyclic charging, etc. The device can store and access up to five different sets of data for a variety of different battery types. These data sets are saved in the program settings, giving you direct access to the corresponding information for charging or discharging a specific type of battery. You can access this information and perform the charging/discharging process whenever you like without having to re-enter the corresponding program settings again every time. You can perform up to five charge/discharge cycles or discharge/charge cycles to refresh and balance NiMH or NiCd batteries.

Specifications

• Input voltage 11-18.0V DC
• Performance Max. 200W for charging; max. 25W for discharging
• Charging current 0.1 to 10.0A
• Discharging current 0.1 to 5.0A
• Consumption for balancing LiPo rechargeable batteries: 300mAh/cell
• Battery types 1-18 NiCd/NiMH cells
• 1-6 Li-Ion/Li-Po/Li-Fe cells
• Lead acid battery voltage 2 to 24V
• Weight 610g
• Dimensions 175 x 150 x 67mm